As a CNC Turning Parts Manufacturer, share with you. Reproduced parts produced by CNC lathes: The use of CNC Turning Parts has a high proportion of man-hours. For example, process analysis preparation, programming, part first part adjustment trial cutting, the total of these comprehensive man-hours is often several tens to hundreds of times the number of man-hours for the processing of a single piece of a part, but these CNC lathes can be saved and used repeatedly. When a part is trial-produced successfully on a CNC grinder and then repeatedly put into production, the production cycle is greatly reduced, the cost is also small, and better economic benefits can be obtained.
CNC Turning Parts
Requires key parts that guarantee the processing quality and can be efficiently produced: CNC grinders can achieve high-precision, high-quality, and efficient grinding processing under computer control. Compared with the special a grinding machine, it can save many special process equipment, has strong flexible manufacturing capacity and obtain better economic benefits. Compared with ordinary grinders, it can eliminate many artificial interference factors in the long process flow of complex processing, has good consistency and interchangeability of processed parts, and high processing efficiency.
The parts processed by the CNC lathe should meet the technical characteristics of the multi-process centralized processing of the CNC grinder. When the CNC grinder processes the part, the condition of the workpiece cut by the grinding wheel is exactly the same as that of the corresponding non-NC grinder, but it can perform some processing accuracy requirements For complex machining, for example, in the area of grinding, ordinary grinders are mainly used for grinding cylindrical surfaces, circular CNC lathes, tapered surfaces, or end faces of stepped shoulders. Torus, and the complex combination of the above various forms.
The processing batch size of the parts should be larger than that of ordinary CNC lathes and batch CNC lathes in the processing of non-NC grinders for small and medium batches. Due to various reasons, the pure cutting time only accounts for 10% -30% of the actual working hours. When machining on a CNC grinder with a multi-process concentration such as a grinding machining center, this proportion may rise to 70% to 80%, but it is often much longer to adjust the adjustment time, so the number of parts will be too small to become uneconomic.
Considering the processing of some special parts of CNC lathes, although some parts are processed in small batches, ordinary lathes have complex shapes and high quality, and require good interchangeability. This cannot be achieved on non-NC grinders and can only be arranged to Machining on CNC grinders, such as parabola, cycloid cam, and special mirror surface.
Our company also has CNC Turned Brass Parts on sale, welcome to consult.